TP-Link Wi-Fi Range Extender 300mbps Not Working? Let’s fix!
TP-Link range extender is a popular networking device. It will enhance the performance of your existing WiFi network and expand the signal to reach locations with poor connectivity. But, some people complain about that they face issues after TP Link setup. If you are also facing this issue and you find a solution, then you have come to the exact place where you are supposed to be. In this post, we will discuss all the troubleshooting tips to help you fix the extender 300mbps not working issue.
Before we dive into the troubleshooting tips, we would like to tell you about the reasons behind the range extender 300mbps not working issue. By knowing the causes you will get the root of the issue. Plus, this will make it easy to fix the problem in no time
Causes- TP-Link Wi-Fi Range Extender 300mbps Not Working
There are many causes why you are facing the TP-Link extender 300mbps not working. Here is a list of some of the most common reasons:
There are many interference sources such as baby monitors, microwaves, refrigerators, treadmills, Bluetooth speakers, televisions, fish tanks, and insulated walls that can affect WiFi signals.
It is possible that you got a 300mbps WiFi-enabled extender, but your host router may not be.
Solutions- TP-Link Wi-Fi Range Extender 300mbps
The approach to fix the TP-Link wireless range extender 300mbps not working issue is pretty simple. If you have no idea how to resolve the issue then walk through the hacks mentioned below in the exact way:
I. Restart Your TP-Link Extender
The very first and most effective way to resolve the extender 300mbps not working issue is to power cycle your extender. Rebooting works like magic in fixing many software hiccups. Without giving a second thought about it, restart your TP-Link extender. You can do this by turning it off and unplugging it from the wall socket. Now, wait for a couple of seconds. Now, insert the range extender back into the power source and hold the On/Off button.
II. Verify the Connection
The next way to resolve the range extender 300mbps not working issue is by checking whether the TP-Link extender is properly connected to the home router or not. Confirm the same by having a good look at the Ethernet cable and the connecting ports. Be sure that a quality cable is joining the right port on both devices.
On the off chance, if WiFi devices are connected wirelessly, you need to ensure that the extender is not kept out of range.
III. Move the Devices Closer
Another way to fix the TP-Link Wi-Fi range extender 300mbps not working issue is by moving the wireless devices closer to each other. The ideal place to locate the range extender is halfway between your WiFi router and your client device.
IV. Reset to Factory Defaults
If none of the troubleshooting tips worked in your favor or you still face a Wi-Fi range extender 300mbps not working issue then worry not. We still have one more solution that can help you get rid of it in a jiffy. And that is, resetting your TP-Link WiFi extender. To reset it, use the steps given below:
- First of all, remove the connection between the WiFi router and extender.
- After that, make sure that your extender is powered on.
- Next, find the Reset button available on it.
- Now, take a sharp pointed object like a toothpick or paper clip and push it gently for a few seconds.
In this way, your TP Link range extender reset to its factory default settings. Do not forget to configure your extender once again using the correct instructions. Refer to the user manual if you don’t know how to set up TP-Link extender.
On the off chance if the issue persists then it’s time to update the TP-Link extender firmware.
V. Update the Extender Firmware
- Open an internet browser and enter the default web address in the location bar.
- Within a few seconds, the login page will appear.
- Here, fill in the default login values and click on the Log In button.
- Now, go to the Settings tab and select System Tools > Firmware Upgrade.
- Thereafter, click on the Browse option and select the download firmware file.
- At last, click on the Upgrade.
- In this way, your TP-Link extender firmware is upgraded to its latest version.
The Final Thoughts
Here, we put a full stop to this helpful article on how to resolve the TP-Link Wi-Fi range extender 300mbps not working issue. We hope that by referring to the information given in this post, you will be able to fix the extender 300mbps not working problem in a hassle-free way.